Your shopping cart is empty!
-270x270.jpg)
-1000x1000.jpg "UPS PowerSupply (12V 10A)")
UPS PowerSupply (12V 10A)
Technical Parameter:
Model
No.: FPS 1210N-01BD
· Uninterruptible
PSU
· Metal Case With
Key-lock
· 85% High
efficiency
· 2 Years
Warranty
· Full Protection
· No delay battery boot up
· 100% full load burn-it test
· Work with different optional modules
FPS 1210N-01B is an UPS power supply, its main
output is 13.6V / 10A, while it also provides maximum 2A charge current. It
could be used for CCTV surveillance / access control / fire alarm and other
security systems.
|
INPUT |
Voltage Range |
190 - 240VAC |
|
|
Frequency Range |
50 - 60Hz |
||
|
OUTPUT |
Voltage (AC Mode) |
13.6V ±2% |
|
|
Voltage (Battery Mode) |
Same as battery voltage |
||
|
Rated Current |
10A |
||
|
Rated Power (Max.) |
163.2W (with 2A charge current) |
||
|
Efficiency (Typ.) |
>85% |
||
|
Ripple & Noise |
<120mVp-p |
||
|
Output Channel |
2 channels |
||
|
CHARGING |
Voltage |
13.6V ±2% |
|
|
Current |
2A (max.), Constant voltage mode, charge current decreases when battery voltage increases. |
||
|
PROTECTION |
Input |
3A / 250VAC fuse |
|
|
Overload |
12A ±5%, Hiccup mode, recovers automatically after fault condition is removed. |
||
|
Over Voltage |
16V ±5%, Hiccup mode, recovers automatically after fault condition is removed. |
||
|
Short Circuit |
Hiccup mode, recovers automatically after fault condition is removed. |
||
|
Battery Low Voltage |
10V ±2%, PSU shuts down until AC power recovers. |
||
|
Battery Reverse Connect |
Battery not works, no effect on main output. |
||
|
ENVIRONMENT |
Temperature |
Working: -20 - 50℃ |
Storage: -30 - 80℃ |
|
Humidity |
Working: 20 - 80%RH |
Storage: 10 - 90%RH |
|
|
LED INDICATOR |
Red |
On |
AC power is on |
|
Green |
On |
DC output is on |
|
|
Yellow |
On: Battery is discharging / fully charged / no battery |
||
|
Flickering: Battery is charging |
|||
|
Red |
On |
AC failure alarm |
|
|
Red |
On |
Battery low voltage (<11V) alarm |
|
|
SAFETY & EMC |
EMC Standards |
EN 55022: 2010, EN 55024: 2010, EN 61000-3-2: 2014, EN 61000-3-3: 2013 |
|
|
LVD Standards |
EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 + A2: 2013 |
||
|
METAL BOX & PACKING |
Default Metal Box |
285 x 285 x 90mm, fits for 1 pc 12V 10Ah battery. |
|
|
Optional Metal Box |
395 x 285 x 90mm, fits for 1 pc 12V 20Ah battery. |
||
|
395 x 285 x 165mm, fits for 1 pc 12V 55Ah battery. |
|||
|
Packing |
51 x 31 x 32.5cm / CTN, 17kg / CTN, 5pcs / CTN (default metal box) |
||